Take out the printer from the sealed box with all its key components i.e. cables, cartridges, etc.
The next thing to do is, remove the polystyrene packaging wraps with the orange tapes along with the plastic covering from the printer.
The first thing for hardware setup is to find out the power socket on the printer. As mentioned in Canon Ij Setup guide, plug the power cable to the wall socket and then to the printer’s port.
After that, switch the printer on by pressing the power button. And you will find the printer’s display light on.
For inserting the ink tanks, remove the cartridges outlet seal and the plastic covers covering it.
The printhead carriage will adjust itself once you open the top cover of the printer. Put all the cartridges and put them into their correct slots.
After putting the cartridges into the slots, close the printer top cover and suddenly you will observe that the printer will start making noise. This is the indication that ink cartridge installation is successfully done.
After then, open the flap of the printer and then pull out the input tray and then, put some pages into the paper tray.
Put the paper tray back to its place properly.
This finally finishes the configuration of your Canon Printer via canon.com/ijsetup.
For all models of Canon printers, you can follow these simple steps to unbox the printer. Unpack your printer. Before you begin installing the printer, you should be aware of all the components that come along with your Canon printer. Based on the type of printer you purchased, you might get all the components mentioned below or it might be different. If you purchased a printer that comes all-in-one, you will get to check all the components. Credit pay someone to do my essay for me
To set up Canon Printer first, locate and note down your Printer model. Attach your Canon Printer to a computer thru a USB cable connection.
It will automatically install the drivers but you need to connect with the wireless option so visit canon mg3600 wifi setup
Now you have your Printer model number with you, enter here, and download the latest and updated Printer drivers.
Canon printers are known for high speed and quality printing documents. Although, sometimes you may face the issue of Canon printer not printing black. Let’s take a look at the solutions to resolve the same. There can be many reasons due to which Canon printer won’t print black. But you can get rid of the issue through common troubleshooting ways.
How to fix Canon printer not printing black?
· First, make sure that the paper you loaded for printing, matches the paper type settings.
· Check whether you have opted for black/grey settings.
· The nozzles should not be clogged. Clean the print head if necessary.
· Check the levels on the ink cartridges, if it low replace them with a new one.
· Make sure you are drying out the printed paper properly and not stacking them on top of each other immediately.
Start by unboxing the Canon printer and remove all the plastic packaging.
Now, remove all the orange protective tapes carefully from the printer.
After that remove the protective tape from the printhead locking cover after opening it for print head installation.
The next step involves installing a colored print head to the left side of the Canon IJ printer.
Perform the same step for the black print head installation.
Once you have installed the print heads, shut down the print head locking cover by gently pressing it downwards until you hear a click sound.
Now gently press the scanning cover unit to shut that as well.
Now, plug in your printer to a power outlet and switch it on.
Once your printer is turned on, a language message will reflect on your screen. From there select your language and then press the OK button to confirm.
Now, one by one pour ink into their respective ink cartridges.
To pour ink properly, carefully fit the ink bottle nozzle into the ink cartridge and keep the ink bottle upright and wait until it’s emptied into the tank. Perform this process separately for all the colored inks.
Try to avoid any spillage and also, make sure you pour the ink into the right ink tank.
You may get rid of the ink bottles once they are empty.
Now proceed with the ink preparation system after closing the scanning cover unit.
Next step is to open the printer input tray and assemble the A4 plain sheets in it.
Now take out the paper support and then open the feed slot cover and settle the right paper guide to the edge.
Now, place the paper to be printed, facing down. After that settle the tight paper guide according to it.
After settling the guides and placing the paper, shut the feed slot cover and open the printer output tray extension.
Now the next step is to open the feed slot cover by taking out the paper support and shift the right paper guide to the edge.
That’s it! Your Canon IJ printer setup is complete and you can experience effective and affordable printing at once.
This may help, JWick